2010 Ford FUSION 3.5L V-6 Firing Order
2010 Ford FUSION 3.5L V-6 Firing Order
Facts about the 2010 Ford Fusion 3.5L V-6 Engine
The 3.5L V-6 engine has:
Dual overhead camshafts
Four valves per cylinder
Sequential Multi-Port Fuel Injection (SFI)
An aluminum lower intake manifold and a composite upper intake manifold
Aluminum cylinder heads
An aluminum, 60-degree V-cylinder block
Timing chain driven coolant pump
Variable Camshaft Timing (VCT) system
The electronic ignition system with 6 ignition coils
2010 Ford FUSION 3.5L V-6 Spark Plug Information
Coil-on-plug ignition system
Spark plug type AYFS-22FM
Spark plug gap 0.051-0.057 in
Spark plugs torque 133 IN/lbs
2010 Ford FUSION 3.5L V-6 Engine Firing Order
Firing order 1-4-2-5-3-6
2010 Ford FUSION 3.5L V-6 Oil Specifications
SAE 5W-20 Premium Synthetic Blend Motor Oil or fully synthetic meeting Ford Spec: WSS-M2C930-A
Fill capacity 5.5 qts with filter change
2010 Ford FUSION 3.5L V-6 Coolant Specifications
NOTE: Early build vehicle (built before July 6, 2009) cooling systems are filled with Motorcraft® Premium
Gold Engine Coolant. Late build vehicle (built on or after July 6, 2009) cooling systems are filled
with Motorcraft® Specialty Green Engine Coolant. Mixing coolant types degrades the corrosion
protection of the coolant. Do not mix coolant types. Failure to follow these instructions may result in
engine or cooling system damage.
Motorcraft® Specialty Green Engine Coolant
VC-10-A (US); CVC-10-A (Canada) meeting Ford Spec WSS-M97B55-A
10 qts fill.
©, 2018 Rick Muscoplat
Posted on by Rick Muscoplat