Rick's Free Auto Repair Advice

AC blows warm air, how to diagnose and fix

Car AC blows warm air, how to diagnose and fix

How to diagnose a car AC blows warm air condition

Don’t just add refrigerant to solve a car AC blows warm air condition. There are many other things that can cause a fully charged system to blow warm air. There are certain steps you should take to diagnose why your car AC blows warm air. Here they are:

Check for AC compressor clutch engagement

You car AC system can’t cool if the compressor clutch doesn’t engage.

AC compressor clutch not enagaging

AC compressor clutch connector

Lack of compressor clutch engagement can be caused by low system charge, excessively high pressure, fuse, relay, clutch connector or grounding issues, incorrect clutch air gap or a failed compressor clutch coil.

So start your diagnosis by turning the AC to MAX. Start the engine and pop the hood. Check to see if the center AC compressor clutch disc is spinning. If not, read this post to diagnose a compressor clutch not engaging condition.

If the AC compressor clutch engages and immediately disengages, you may have a clogged orifice tube or expansion valve. To learn more about orifice tube and expansion valve systems, see this post.

If the AC compressor clutch is spinning but your car AC blows warm air, follow these steps

Determine which type of system the car maker installed in your vehicle. Orifice tube and expansion valve systems operate differently and must be tested differently. Find the type of system in your vehicle in this chart

Learn how an orifice tube system works BEFORE you start working on it

An orifice tube system is pretty simple. The orifice tube is simply a refrigerant metering device that allows only a certain amount of refrigerant into the evaporator coil. Orifice tubes incorporate a filter to prevent crud from clogging the orifice. When the filter becomes plugged, it can’t allow enough refrigerant to enter the evaporator. If you don’t understand how an orifice tube system works, you can’t diagnose and fix it.

See this post to learn how an orifice tube system works

See this post to learn how to diagnose an orifice tube system

Learn how an expansion valve system works BEFORE you start working on it

An expansion valve system is a bit more complicated and slightly harder to diagnose. The expansion valve can be a “block” style” or a valve with a capillary tube. It’s job is to meter liquid refrigerant into the evaporator based on the outlet temperature at the evaporator or the temperature of the evaporator coil using a capillary tube. Expansion valves can fail due to clogging, a kinked capillary tube (especially if you’ve had work done under the dash or hood), or failure of the diaphragm.

See this post to learn how expansion valve systems work

See this post to learn how to test an expansion valve system

Click here for more information on how to fix your car’s AC

Most common reasons why car AC won’t cool

©, 2018 Rick Muscoplat

 

Posted on by Rick Muscoplat



Custom Wordpress Website created by Wizzy Wig Web Design, Minneapolis MN