P0340 Ford F-450 cranks but no start and intermittent bucking
If your F-450 cranks but won’t start or starts and then bucks, head for the camshaft position sensor. It’s located on the right side of the engine timing cover above the crankshaft balancer. You’ll need a scope to check it because it creates a 12 volt square wave. Probe the dark green wire to check the signal. If the signal is erratic, replace the sensor. This sensor has a high failure rate and may not even be worth testing. If you don’t have a scope, just replace it.
For more information on this repair or any others for your vehicle, buy an online subscription to either Alldatadiy.com or eautorepair.net. Click on this link to compare the two services: Compare Alldata and Eautorepair.
© 2012 Rick MuscoplatPosted on by Rick Muscoplat