Hard start on Escape, Fusion, or MKZ — Ford TSB Fix
Fix for Hard start or no start on Ford Escape, Fusion, or Lincoln MKZ
Ford has issued a service bulletin #16-0075 to address a Hard start, no start Escape, Fusion, MKZ condition. The symptoms usually appear right after refueling. If you fill up with gas and can’t start your Escape or Fusion, this bulletin may be for you.
Vehicles affected
2013 Escape Built on or before 11/9/2013
2013-2014 Fusion Built on or before 11/9/2013
2013-2014 Lincoln MKZ Built on or before 11/9/2013
Hard start, no start symptoms
Right after refueling you may notice extended cranking before firing up or a no start condition. You may also notice a check engine light with trouble codes P1450, P0456 stored in memory.
The service procedure involves replacing the evaporative emission canister purge valve 1. The bulletin provides a list of part numbers and names for the replacement valve, as well as the operation description and time required for each vehicle model.
Here’s how to fix the Hard start, no start Escape, Fusion, MKZ
Replace the evaporative emission canister purge valve with an updated part.
GG9Z-9D289-C Evaporative Emission Canister Purge Valve – Fusion/MKZ 1.5L
DG9Z-9D289-G Evaporative Emission Canister Purge Valve – Fusion/MKZ 1.6L
DG9Z-9D289-D Evaporative Emission Canister Purge Valve – Fusion/MKZ 2.0L
CV6Z-9D289-B Evaporative Emission Canister Purge Valve – Escape 1.6L
CV6Z-9D289-R Evaporative Emission Canister Purge Valve – Escape 2.0L
©, 2018 Rick Muscoplat
Posted on by Rick Muscoplat