P2015 Audi

Fix P2015 Audi

Audi has issued a service bulletin #24 16 53 2044003/1 4-19-16 to address a P2015 Audi trouble code. The P2015 Intake manifold runner position sensor/switch circuit range/performance trouble code fix applies to the vehicles listed below.

2010 A3, A4, A5, A5 Cabriolet, TT, VIN range—All, Engine 2.0L

2011 A3, A4, A5, A5 Cabriolet, Q5, TT, VIN range—All, Engine 2.0L

2012 – 2013 A3, A4, A5, A5 Cabriolet, A6, A7, Q5, TT, VIN range—All, Engine 2.0L

2014 A4, A5, A5 Cabriolet, A6, A7, Q5, TT, VIN range—All, Engine 2.0L

2015 A4, A5, A5 Cabriolet, A6, A7, Q3, Q5, TT, VIN range—All, Engine 2.0L

2016 A4, A5, A5 Cabriolet, Q3, Q5, VIN range—All, Engine 2.0L

The P2015 Audi trouble code relates to the intake manifold runner position sensor switch and is caused by corrosion in the valve for intake manifold flap N316.

Fix for P2015 Audi

Obtain a revised intake manifold flap valve #06H 906 283B from the dealer. The revised valve has a connection to attach a fresh air line that will prevent corrosion in the future.

Install the new valve along the cylinder head cover and secure it with the clips included with the kit. On in-line engines, remove the bolt for the wiring harness between the 2nd and 3rd cylinder and secure the new fresh air line with this bolt.

On transverse engines, use the new M6 x 14 bolt supplied with the kit. This is a thread cutting bolt.

Then secure the clean air line, routing it between the cylinder head cover and the vacuum unit lever for the intake manifold flap.

©, 2016 Rick Muscoplat