Park Avenue tire pressure sensor reset
Buick Park Avenue Tire pressure sensor reset procedure
If you own a Buick Park Avenue and want to do a tire pressure sensor reset, follow these instructions.
2002-05
- Set all tire pressures to manufacturer’s specifications.
- Turn ON the ignition, with the engine off.
- Press the GAGE INFO button until TIRE PRESSURE is displayed.
- Press and hold the RESET button until TIRE PRESSURE RESET is displayed.
- Release the RESET button, TIRE PRESSURE NORMAL is displayed.
2000-01
Reset Using the Driver Information Center. This procedure takes 30 minutes of straight line driving in all three speed ranges to complete the calibration process
- Set all tires to the manufacturer’s recommended pressure.
- Start the engine.
- Press the SELECT buttons on the DTC to scroll until GAGE PAGE is displayed in the DTC.
- Press the SELECT buttons on the DTC within the GAGE PAGE display until the TIRE PRESSURE LOW message is displayed on the DTC.
- Press and hold the DTC RESET button on the DTC until the TIRE PRESSURE RESET message is displayed on the DTC.
- Release the button, the TIRE PRESSURE NORMAL message is displayed. The system is now in the autolearn mode.
1997-99
- Set all tires to the manufacturer’s recommended pressure.
- Start engine.
- Press the GAGES button on the IP until the TIRE PRESSURE message appears on the instrument cluster message center display.
- Press and hold the RESET button on the IP until the TIRE PRESSURE RESET message appears.
- Release the button, the TIRE PRESSURE NORMAL message appears. The system is now in the autolearn mode.
You need a professional shop manual to work on a late model vehicle. And you need access to the latest technical service bulletins so you don’t waste time and money replacing parts that may misbehave due to a manufacturer’s software glitch. Forget about those cheap manuals you find at the auto parts store. They will just lead you astray. Here are the two best online shop manuals around.
©, 2013 Rick Muscoplat
Posted on by Rick Muscoplat