Rick's Free Auto Repair Advice

Speedometer doesn’t work ABS light on

Speedometer doesn’t work ABS light on – Durango

If you own a Dodge Durango (1998-2000) and your speedometer doesn’t work or the ABS light is on or the brake light is on, here’s what to do.
Start by unplugging the rear wheel speed sensor. It’s located in the differential housing. Use a digital multimeter set on the ohms scale and check the resistance of the sensor. ABS sensor, differential speed sensor, ABS, brake lightResistance should read between 1600 and 2800 ohms. If it doesn’t replace the sensor. If it does check out, plug the connector back into the sensor. Next, unplug the 14-cavity ABS controller connector and check the sensor’s resistance through the wiring harness. Connect the leads to terminal 1 (red/violet wire) and terminal 8 (white/violet) wire. If the resistance is not in spec, repair the wiring harness.

 

© 2012 Rick Muscoplat

Save

Posted on by Rick Muscoplat



Custom Wordpress Website created by Wizzy Wig Web Design, Minneapolis MN