06-10 Audi Tire pressure sensor reset A3

To do a tire pressure sensor reset on Audi 06-10 A3 follow these instructions

The tire pressure is calculated by monitoring the ABS and stability control system. A low tire shows up as a different rolling speed compared to the other tires.If the TPMS light comes on, fill the tire to the recommended pressure. The system will relearn and shut off the light. However, if you change a tire, you must perform a tire pressure sensor reset procedure.

   1) Turn the IGN switch to ON (vehicle stopped) until you hear a signal.

2) Press the TPMS button arrow. You’ll hear another signal.

3) The reset is complete

©, 2013 Rick Muscoplat