Ford oil specifications

Ford oil specifications

M2C913-A

SAE 5W-30. This specification meets the ILSAC GF-2, ACEA A1-98 & mB1-98 and additional Ford requirements.

M2C913-B

Engine oils used for lubrication of spark ignition engines using petrol and for compression ignition engines using diesel fuels. The oil shall meet all the requirements of the ILSAC GF-2 & GF-3 specification, the ACEA A1-98 & B1-98 specification and additional Ford requirements.

M2C913-C

Fully backwards compatible and is strongly recommended for all applications that require the specification Ford M2C913-A and M2C913-B. Provides various benefits to the customer such as improved fuel economy benefits and high robustness to biodiesel fuels.
General requirements: ACEA A5/B5.

M2C913-D

Introduced in 2012, oils meeting this specification are recommended for all Ford diesel engines except Ford Ka TDCi models manufactured before 2009 and Ford Galaxy 1.9 TDi models manufactured between 2000 and 2006. Especially recommended for diesel engines where M2C913-B or M2C913-C oils were initially required. Oils meeting this specification can be used with extended oil change intervals and are also suitable to be used in engines running on biodiesel or high sulfur diesel.

M2C917-A

Viscosity SAE 5W-40 engine oil for pump injector diesel engines. Ford’s code for VW specification 505 01. Equivalent performance includes ACEA A3/ B4/C3.

M2C934-B

Extended drain engine oil for vehicles equipped with diesel particulate filter (DPF). The general requirement is ACEA C1. M2C937-A: Special engine oil for Ford Focus RS. Viscosity should be SAE 0W-40. The general requirement is ACEA A3/B4.

M2C948-B

Largely based on the ACEA C2 oil sequence this spec requires a low SAPS 5W-20 oil and is primarily designed for the 2012- on, 1.0 liter, 3-cylinder EcoBoost engine. Contains in-house tests for fuel economy and piston deposit control. Oils meeting this spec must provide a 0.9% fuel economy improvement over regular 5W-20 oils.

M2C950-A

Special engine oil for Ford Focus Diesel 2.0 manufactured from September 2014 and Ford Mondeo Diesel 2.0 manufactured from 2015. Viscosity should be SAE 0W-30