Automotive air filter test — Are amateur filter tests accurate?
Are amateur automotive air filter tests accurate?
Go on to any automotive forum and you’ll see people referencing automotive air filter tests done by amateurs. The tests are usually conducted by someone who has some lab experience. At first glance the results may convince you to buy one air filter brand over another. But these home made tests are bogus because their testing methods don’t duplicate real world conditions. The results are totally worthless. Here’s why.
The air filter testing setup is wrong
Auto engineers design the air filter and air filter box
OEM Air Filter Box
to fit a certain body style and engine. The shape of the filter, surface area, pleat design are all engineered to reduce noise, create laminar airflow into the MAF sensor and precipitate particles out of the air stream. Any air filter testing that’s done without using the exact factory setup is suspect from the get-go.
“Modern intake air systems such as this remove turbulence from air flowing into the MAF sensor. The difference in cross-sectional area decreases the velocity of intake air as it enters the air filter housing causing airborne debris to fall to the bottom of the housing. This increases the life of the air filter and tends to dampen the throaty resonance of air rushing into the engine. Last, and most important, this reduction in air velocity helps increase the accuracy of the MAF sensor by removing turbulence from the incoming air.”— www.knowyourparts.com/technical-articles/air-and-fuel-filter-service-tips/
When you change an air filter, the first thing you notice is an accumulation of dirt at the bottom of the air filter box. How did it get there and why isn’t it lodged in the air filter? I mean, isn’t the air filter supposed to collect and hold dirt?
Dirt at the bottom of the air filter box
What you’re seeing is the precipitation effect of the air filter box design. It causes particulate matter to drop out of the airflow to increase filter life. If the air filter test isn’t conducted in the same air filter box, the results won’t be accurate.
The particulate matter is wrong
Most of the amateur air filter testers use a fine particulate to test the filter’s ability to capture and hold small particles. Right from the start, this method is wrong. Actual road conditions generate a mix of particulate size. New air filters has zillions of open pores. In fact, new filters keep out less dirt than older filters. In order to filter properly a new filter must build up a dust film. That makes the large holes smaller, allowing them to trap more dirt. In other words, automotive air filters are the LEAST efficient when new. Injecting ultra small particle matter into a new filter doesn’t provide ANY kind of reliable result. All air filters INCREASE in efficiency until the point where they’ve collected too much matter.
If the particle size is smaller than the filter’s pore, it’ll pass through the pore and into the next layer with smaller pores. The particle continues through the filter media until it reaches a pore that’s too small. As the smallest pores become plugged, the air filter becomes more and more efficient.
Air filter contaminant size
Filter Manufacturer’s Council
Technical Service Bulletin 04-3
Most of these amateur air filter tests are conducted on new filters where the smallest pores haven’t been plugged. So the tester injects extremely fine particles and measures how many of those particles pass through the filter media’s pores. Does that result mean anything? No.
It only means that on day one of use, one filter may outperform another filter. But is the test valid in the real world where larger particles plug the smallest pores first? If those “failed” filters had been in use for a week, their smallest pores would have been plugged and that same failed filter would be even more efficient than the “passing filter.”
Air filter manufacturers aren’t stupid
All automotive air filter manufacturers known what the ISO and SAE tests are and they manufacture their filters to pass those standards. They have way too much liability at risk to not pay attention to those filtration standards.
Air filter manufacturers use different filtering materials for each vehicle design. Some incorporate a mix of cellulose and synthetic fibers for a certain make and model, but change the ingredients for a different engine.
If the air filter tester isn’t using ISO or SAE testing procedures, then their tests aren’t accurate.
© Rick Muscoplat
Posted on by Rick Muscoplat