Nissan power window relearn process
Learn how to perform a Nissan power window relearn process if the windows don’t work after a battery disconnect
Nissan has issued a service bulletin to address an issue where Nissan power windows don’t work after a battery disconnect or replacement or a window fuse has blown. Due to the loss of power, the windows have lost their calibration and you must perform a Nissan window relearn process described below.
This is NOT caused by the window regulator or window controller, so don’t replace either of those.
Nissan relearn process
1) Turn the IGN to ON and open the window fully
2) Close the window until it hits the stop and the top of the channel and CONTINUE holding the window switch for an additional 4-secs.
3) Repeat the process on all four windows
The Nissan power window problems
affects the following Nissan vehicles:
2003-07 Murano
2003-08 350Z
2004-08 Armada, Maxima, Quest, Titan
2005-08 Frontier, Pathfinder, Xterra
2007-08 Versa, Altima Sedan, Altima Hybrid, Sentra
2008 Altima Coupe, Rogue
©, 2014 Rick Muscoplat
Posted on by Rick Muscoplat