2009 Accord Fuse Box Diagram: Understanding the Fuse Boxes

Understanding the Fuse Boxes on the 2009 Accord

The 2009 Accord has three fuse boxes: 1) The driver’s side cabin fuse box is located under the dashboard on the driver’s side. You can find the fuse label near the side panel. 2) The passenger’s side fuse cabin box is on the lower side panel near the passenger seat. To remove the fuse box cover, place your finger in the notch on the lid, pull it up slightly, then pull it toward you to release it from the hinges. 3) The third fuse box is under the hood on the driver’s side. To open it, simply push the tabs as shown in the manual. This article shows all 3 of the 2009 Accord fuse box diagrams.

2009 Accord Fuse Box Diagram For The Driver’s Side Cabin Panel

This fuse box is located under the dashboard on the driver’s side. The fuse label is attached to the side panel near it.

2009 Accord Fuse Box Diagram For The Passenger Side Cabin Panel

The passenger’s side fuse cabin box is on the lower side panel near the passenger seat. To remove the fuse box cover, place your finger in the notch on the lid, pull it up slightly, then pull it toward you to release it from the hinges.

2009 Accord Fuse Box Diagram For The Under Hood Panel

The third fuse box is under the hood on the driver’s side. To open it, simply push the tabs as shown in the manual. This article shows all 3 of the 2009 Accord fuse box diagrams.

Radio Caution When Checking Fuses or Replacing A Car Battery

Standard for LX and EX models in the U.S., and LX and Si models in Canada

If the radio fuse is removed, the audio system will disable itself. The next time you turn on the radio, you will see ‘‘COdE’’ in the frequency display. Use the preset buttons to enter the five-digit code.

To make it work again, enter a specific five-digit code in the preset buttons. Because there are hundreds of number combinations possible from five digits, making the system work without knowing the exact code is nearly impossible.

You should have received a card that lists your audio system’s code and serial numbers. It is best to store this card in a safe place at home. In addition, you should write the audio system’s serial number in this Owner’s Manual.

If you lose the card, you must obtain the code number from a dealer or the Honda Owner’s website. You will need the system’s serial number to do this.

Use the preset buttons to enter the five-digit code. If you make a mistake entering the code, do not start over; complete the five-digit sequence, then enter the correct code. You have ten tries to enter the correct code. If you are unsuccessful in ten attempts, you must then leave the system on for 1 hour before trying again.

How to find your radio serial number

1) Locate the Honda Radio Anti-Theft Card

The Radio/Navigation Code and the device unit’s serial number are listed on the

Locate the Radio Anti-Theft card from your glove box

anti-theft ID card that comes with the vehicle. The card is usually placed in the glove box at the time of delivery.

2) Enter the Radio’s Serial Number on the Honda Website

Retrieve the Serial Number From the Radio Display

1. Turn the ignition switch to ON.
2. Turn ON the device and confirm that the display reads CODE. If you don’t see this message, pull the backup fuse for 1 minute, and then go back to step 1.
3. Turn OFF the device.
4. Press and hold the 1 and 6 radio preset buttons, and turn ON the device.
5. The display toggles between two screens: U with the first 4 digits of the serial number (U2200 for example,)
6. And L with the last 4 digits of the serial number (L0055 for example).
7. Ignore the U and L and record all 8 digits.