2010 Ford Fusion 3.0L V-6 Firing Order

2010 Ford Fusion 3.0L V-6 Firing Order

Facts about the 2010 Ford Fusion 3.0L V-6 Engine

The 3.0L (4V) is a V-6 engine with the following features:
Dual overhead camshafts
Four valves per cylinder
Sequential Multi-Port Fuel Injection (SFI)
A composite lower intake manifold and a composite upper intake manifold
Aluminum cylinder heads
Two-piece design aluminum cylinder block
Variable Camshaft Timing (VCT) system
Electronic ignition system with 6 ignition coils

2010 Ford Fusion 3.0L V-6 Spark Plug Information

Coil-on-plug ignition system
Spark plug type CGSF-22N
Spark plug gap 0.045-0.049 in
Spark plugs torque 133 IN/lbs

2010 Ford Fusion 3.0L V-6 Firing Order 1-4-2-5-3-6

Firing order 1-4-2-5-3-6

2010 Ford Fusion 3.0L V-6 Oil Specifications

SAE 5W-20 Premium Synthetic Blend Motor Oil or fully synthetic meeting Ford Spec: WSS-M2C930-A
Fill capacity 6.0 qts with filter change

2010 Ford Fusion 3.0L V-6 Coolant Specifications

NOTE: Early build vehicle (built before July 6, 2009) cooling systems are filled with Motorcraft® Premium
Gold Engine Coolant. Late build vehicle (built on or after July 6, 2009) cooling systems are filled with Motorcraft® Specialty Green Engine Coolant. Mixing coolant types degrades the corrosion protection of the coolant. Do not mix coolant types. Failure to follow these instructions may result in engine or cooling system damage.

Motorcraft® Specialty Green Engine Coolant with Bittering Agent (US); Motorcraft® Specialty Green Engine Coolant (Canada) VC-10-A (US); CVC-10-A (Canada) meeting Ford Spec WSS-M97B55-A

9.7 qts fill

©, 2018 Rick Muscoplat